Due to the configuration of the vacuum tubes that make up the solar collector, they are capable of capturing diffuse radiation, even on cloudy days, thus heating the water to acceptable levels.
Another characteristic of vacuum tube water heating solar collectors is that they allow better adaptation to those cases where an installation with the optimal inclination or orientation is not possible, improving performance. This property means that vacuum tube water heating solar collectors can be integrated even better into the architecture of buildings, which in each case will be different.
The installation is easily done by the user based on the installation manual we provide.
Outer manifold material
| Al-Zn coated steel sheet / color steel / stainless steel: 0.4mm|
| Imported Polyurethane foam with high density|
Inner manifold material
| Stainless steel|
Φ58mm*1800mm three-target vacuum tube (CU/SS-ALN(H)/SS-ALN(L)/ALN
| 25mm / 35mm|
| Aluminum alloy / Galvanized steel / Stainless steel|
| Controller, Electric heater, Magnesium rod.|