Non-pressurized Solar Heater
Non-pressurized solar heater for domestic use make the water is heated by means of vacuum tubes which take advantage of solar radiation. Cold water is heavy, and when heated increases the density reason why it rises to the top of the storage tank which has a thermal layer of usually 50mm to keep the water warm.
And our this non-pressurized solar heater has an auxiliary tank which aims to keep the main tank filled with water. When opening the hot water stopcocks, the pressure depends on the height where the heater is installed, as it is attracted by gravity. Our non-pressurized solar heater is recommended to install 2 to 3 meters high in relation to the shower.
Specification
Inner Tank: Food Grade Stainless Steel SUS 304-2B, thickness 0.4mm, diameter 360mm
Outer Tank: Galvanized Steel, thickness 0.4mm, diameter 460mm
Insulation: 50mm high-density polyurethane foaming
Inlet and Outlet hole size: 1/2 or 3/4
Frame: Galvanized Steel, 45 angel
Vacuum Tube: Φ58mm*1800mm three-target vacuum tube (CU/SS-ALN(H)/SS-ALN(L)/ALN)
Features
1. Easy installation;
2. Corrosion resistant materials;
3. High efficiency;
4. Environmentally friendly and economical;
5. Simple structure and working principle.
Optional Accessories
1. Magnesium anode
2. Intelligent controller
3. Electric heater
4. Assistant tank
Loading Information
Model | Vacuum Tube | Tank and Tube Capacity(L) | Application Person | Loading Quantity(sets) | |||
Diameter(mm) | Length(mm) | Quantity(pcs) | 20GP | 40HQ | |||
BS-NP-6 | 58 | 1800 | 6 | 60 | 1,2 | 107 | 240 |
BS-NP-8 | 8 | 80 | 1,2 | 89 | 200 | ||
BS-NP-10 | 10 | 100 | 2 | 73 | 176 | ||
BS-NP-12 | 12 | 120 | 2,3 | 64 | 150 | ||
BS-NP-15 | 15 | 150 | 3 | 53 | 125 | ||
BS-NP-18 | 18 | 180 | 3,4 | 44 | 108 | ||
BS-NP-20 | 20 | 200 | 4 | 41 | 98 | ||
BS-NP-25 | 25 | 250 | 5 | 33 | 80 | ||
BS-NP-30 | 30 | 300 | 6 | 26 | 63 |